There is no comfort like being in command. KOEL Green Generators put the command in your hands. Micro-processor based Generator controllers display a host of Generator parameters and put all controls at your fingertips.
KG controllers have the following features:
1. Genset monitoring: KG controllers monitor vital genset parameters and provide necessary protection to ensure that the KOEL green genset operates reliably
2. Genset metering: KG controllers have built in metering of key electrical and engine parameters
3. AMF compatibility: All KG controllers are compatible with AMF panels
4. Communication capability: All KG controllers have an in built communication port to connect to your BMS/SCADA system
Every KOEL green genset is provided with a control panel the houses the genset controller and a power panel that includes an MCB or an MCCB for isolation and protection
KOEL AMFi panels automatically switch on your genset when the mains supply fails and switch off the Genset when the mains supply restores giving you un-matched convenience.
The AMFi panels are ultra-compact; they are over 40% smaller by volume compared to conventional AMF panels.
Your Generator now comes with complete remote monitoring control. Being in control of your own Generator is certainly a winning edge!
The KRM system links your Generator with a central monitoring data server through a SIM and internet. The complete monitoring panel with all critical indicators can be viewed on your laptop screen or mobile. You also get all alarms on your mobile phone.
Critical Parameters: Generator Run hrs, Fuel level, Engine oil pressure, Engine temperature, Engine speed (RPM), voltage/ current/ kW, battery monitoring, PF & Frequency, routine maintenance indicator Critical Alarms: Low fuel level, low lub oil pressure, fuel theft, Engine speed, High Engine temperature, Mains On/ Off, Low/ High battery voltage.
Advantages of KRM system: Your Generator will be used most efficiently as it’s health meter will always be available at your finger-tips. Being a ‘remote control’ this health monitoring can be done from wherever you are. This close monitoring also helps in reducing your operating costs and enhancing reliability of the Generator you own. So in all, you have better return on your investment and enhanced productivity by maximum uptime.
The Touchstone Dynamic Compensation system is connected between the genset and the load. It senses the magnetising current requirements of the load and injects the required current dynamically. It reduces the current drawn from the genset & improves the alternator efficiency. Thus the total losses in the system that are fed by the genset also reduce. The improved efficiency can give fuel saving upto 8%.
The problem of overload related tripping of the genset is quite common in stone crusher plants. This can be attributed to large magnetising currents that are drawn by the stone crusher equipment under certain use conditions. The Touchstone systems helps reduce the burden of supplying this magnetising current and prevents frequent tripping of the genset.
The panel comes with a microprocessor based controller with an LCD display. The controller has a response time of less than 20 msecs. The controller measures the load characteristics and decides the amount of compensation that needs to be provided. The controller has built in metering of voltages, compensation currents and power-factor.
The Touchstone panels are provided with KOEL MCCBs for overload and short circuit protection. KOEL MCCBs are designed to provide unmatched reliability under tough environmental conditions.
The panel has a completely enclosed construction with IP 55 level of ingress protection. The panel is completely finger proof. All terminations are external. The panel has been designed for the stone crusher environment that includes high dust levels. The panel uses the enclosure size and thermal mass for heat dissipation and does not depend on forced cooling for limiting the temperature rise.
Touchstone panels are powered by power electronic switching devices that deliver an unmatched speed of response. The devices have a high voltage withstand and come with inbuilt over current protection.
The KOEL switchgear range is designed to operate with high reliability under harsh conditions. The range includes the following products:
The KLL range of MCCBs has been designed to provide unmatched safety. The range perfectly complements KOEL Green Gensets. Some of the key features of the range are:-
KML MCBs are designed to operate inside the genset control panel to provide control and power circuit protection.
KCL Contactors have been designed to provide unmatched ruggedness. Some of the key features of the range are:-